Trying to locate fuse(s) for the Puma Windscreen Washer motor. I’ve seen on a fuse box diagram that Fuse No.74 (30amp) is for “Windshield Wiper motor”. My wipers are working OK, it’s just the washers (front and rear) that are not.
No. 3 (10amp) is for the Windshield Heated Washer Jets.
No. 82 (15amp) is for the Rear Window Washer Pump.
Can anyone enlighten me as which is the correct fuse(s) for the front and rear washers as I’m confused which one(s) it is.
Of course it may not be the fuses that are causing my washers not to work, but thought it would be the best place to start my investigation. Local Ford dealer wants to charge me £150 for “an investigation fee” – there’re having a laugh, especially if they find out it is just a fuse. !!
Fuses for washers
-
- Posts: 423
- Joined: Sun Apr 07, 2024 9:26 pm
- Location: Yorkshire
I doubt your car will have two washer pumps for front and back and will have one only. I would try fuse 82 and remember that owners manuals are not always correct.
It could also be the pump has failed.
Maybe see if you can get someone to operate the washers whilst you listen if the pumps making a noise if it is then it's blocked and normally that's caused by using cheap screen wash from places like Home Bargains.
It could also be the pump has failed.
Maybe see if you can get someone to operate the washers whilst you listen if the pumps making a noise if it is then it's blocked and normally that's caused by using cheap screen wash from places like Home Bargains.
2024 Ford Puma 1.0 Vignale 155PS DCT, Grey Matter
2015 Kuga Titanium 2.0 150 Manual, Retro Fitted Sync3 with 3.4 software, F13 maps.
2015 Kuga Titanium 2.0 150 Manual, Retro Fitted Sync3 with 3.4 software, F13 maps.
Is the pump still running when you “skoosh” ? . Had the same problem on the wife’s , no water front or rear but pump still running . It’s the filter on the bottom of the tank that get clogged up with gunk. As suggested on here if you connect an air compressor to the pipe it will clear it . Fixed in 2 minutes. If you leave the compressor running it will push the gunk up and out the filler next .